• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 63 subscribers
  • Views 433 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

questions about buck

Jun
Intellectual 430 points
Other Parts Discussed in Thread: BQ51050B

Hi,

I use a Li-lon battery for the system who has an AM3354 CPU(need a buck output is 3.3v 1.8v 1.2v), an AFE4403 to get HR and SpO2, an ADS1292R to get ECG and a 3 inch LCD. A BQ51050B has been used to charge the battery and  supply for the system. Can you give me some suggestions about the Li-lon battary and buck?

  • 0
    TI__Guru**** 150790 points
    Please read the ground rules post at the top of this forum for tips on the title of your post.

    You will need the voltage and current required on each rail to find the best solutions. Then, use the power quick search at power.ti.com to find suitable device.