• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 63 subscribers
  • Views 292 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

calibration of BQ2060A by micro controller

GIRISH GUJAR
Prodigy 100 points
Other Parts Discussed in Thread: BQ2060A

Hello sir,

       We have BQ2060A gas gauge IC. We know that  calibration for VFC by using (0x0653) command for VFC calibration enable and OCE bit will tell the calibration is complete or not but we have question about voltage,current and temperature calibration, how to calibrate these parameter by my processor. we are using ATMEL processor.