TPS65735 application question?

Chen Bogey8

Other Parts Discussed in Thread: TPS65735

Dear Sir

My customer want use use TPS65735 to replace ST9902, but here to measure output waveform. TPS65735 and ST9902 output waveform are the same.

But TPS65735 connect to 3d glass, the 3D glass have no response. may you pls advise us some suggestion?

0 Michael Green over 9 years ago

Try looking into the driving waveforms of the PWMs with glasses connected. Otherwise, sorry I could not be of much help.

0 Chen Bogey8 over 9 years ago

Dear Sir

May we check with you if TPS65735 have I2C programming guide?

Best regards,

Bogey

0 Michael Green over 9 years ago in reply to Chen Bogey8

I2C is for TI internal purposes only. The SCL and SDA pins should be connected to GND in the application.

0 Chen Bogey8 over 9 years ago in reply to Michael Green

Dear Sir

thanks for your reply.

Besr regards,

Bogey

Power management forum