TPS22964C/rise time data

Tsukui Yusuke

Guru 21930 points

Other Parts Discussed in Thread: TPS22964C

Hi teams ,

I’d Iike to ask about TPS22964C.
Do you have rise time waveform data other than Cout=0.1μF?
Customer is wanted as reference data.
Could you tell me something rise time data.

Best Regards,
Yusuke/Japan Disty

over 10 years ago

0 JohnTucker over 10 years ago

TI__Guru**** 191445 points

This is probably the wrong forum for this post. I will move it later.

0 Adam Hoover over 10 years ago

TI__Expert 5275 points

Hi,

The output capacitance has little effect on the rise time. Since the slew rate is controlled, large output capacitance will lead to more inrush.

The applications example is datasheet section 11.2.3 shows a case with 4.7uF of output capacitance. From this, you can see, the rise time is about the same.

Best Regards,
Adam Hoover
Load Switch Applications

0 Tsukui Yusuke over 10 years ago in reply to Adam Hoover

Guru 21930 points

Hi Adam,Thank you for your information.Best Regards,Yusuke/Japan Disty

Power management

Power management forum

TPS22964C/rise time data