• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 64 subscribers
  • Views 653 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LMZ13608 - Saw tooth on output

Zeev Gerber
Intellectual 500 points
Other Parts Discussed in Thread: LMZ13608

Hi,

I use the LMZ13608 on the board with 1.2V, 2.5V, 3.3V.

first batch was 3 cards.

In one of the cards , on the voltage of 1.2V, i get Saw tooth on the output of about 200 mv and every ~175 us (not the freq of the lmz13608 internal osc).

I attached schematic of the devise implementation.

I read again the DS and didn't found any explanation except defect component.

Pls advise

Regards

Zeev Gerber