Inquiry regarding golden file for dual batteries

Atsushi Okui

Hello, all

Now we have one inquiry regarding golden file for dual batteries from our customer.

Please refer to the item below, and feedback us with your comment.

We are going to use dual batteries in serial on our application.

On this case, please let us clarify whether we could make golden file including 2 batteries or should make golden file per 1 battery from bqEASY.

For your reference, the battery capacity is "1025mAh*2 = 2050mAh".

We thank you in advance for your information.

Best regards,

0 ThomasCosby over 10 years ago

If you have two cells in parallel, then you add their capacities and treat them as one cell. You would enter 2050mAh in this case.

0 Atsushi Okui over 10 years ago in reply to ThomasCosby

Genius 4015 points

Hello, thank you for your prompt reply.

Please let us clarify whether this could also be apply in case using 2 cells in serial.

We thank you once again for your information.

Best regards,

0 ThomasCosby over 10 years ago in reply to Atsushi Okui

If you have a 2S1P pack configuration, then the capacity will be 1025mAh.

Power management forum