LM25116 Evaluaion Board desgin files

Christos Karatzoglou

Other Parts Discussed in Thread: LM25116, LM5116, LM25117

Hallo,

Is it possible to provide me with the design files (Schematic-Layout) for the LM25116 evaluation board. Preferably in Altium. Thanks.

over 10 years ago

0 EricLee over 10 years ago

TI__Guru 58171 points

Please contact your local TI FAE.

0 Howard Chen-WEBENCH Design Center over 10 years ago in reply to EricLee

TI__Expert 6365 points

Hi,

I happen to have the LM5116 EVM layout and schematic in Altium on hand supports both LM25116 and LM5116. This is a BuildIt board which is modified to support various footprint sizes. You can also create a WEBENCH design and export the custom schematic and PCB from the tool. And lastly, the complete WEBENCH design BOM and PCB can be ordered from Digikey. I hope this is helpful.

LM5116_buildit (7-13-2012 12-03-53 PM).zip

0 Christos Karatzoglou over 10 years ago in reply to Howard Chen-WEBENCH Design Center

Intellectual 405 points

Hallo Howard,

This is what I want. Thank you very much. Do you have by the way any reference design files also for LM25117 (cause we are thinking to switch to this one) or I have to use Webench?

0 Howard Chen-WEBENCH Design Center over 10 years ago in reply to Christos Karatzoglou

TI__Expert 6365 points

Hello Christos,

The original source files are in Eagle. I have posted them here. But if you want the Altium files, please use WEBENCH to download them.

5117_BUK_B.zip

0 Christos Karatzoglou over 10 years ago in reply to Howard Chen-WEBENCH Design Center

Intellectual 405 points

Hallo Howard,

That will work just fine I can make the import in Altium. The thing is that these are the fabrication files and not the complete design files would be possible to provide me with the design files in Eagle. If not there is no problem I can still use Webench. Thanks again.

Regards

Chistos

Power management

Power management forum

LM25116 Evaluaion Board desgin files