dimensions

sakthivel s

Intellectual 620 points

Other Parts Discussed in Thread: TPS65251

hi,

please give me mechanical dimensions of TPS65251 EVM module.

over 10 years ago

0 JohnTucker over 10 years ago

TI__Guru**** 191445 points

Board dimensions are 2.584" x 2.714" x 0.063"

0 sakthivel s over 10 years ago in reply to JohnTucker

Intellectual 620 points

sir,

This is the dimension of the PCB. i want dimension of the EVM board. when components are placed by the time what is the height of EVM board and where is the place for posters.

0 JohnTucker over 10 years ago in reply to sakthivel s

TI__Guru**** 191445 points

I'll see if i have one to measure. What do you mean by "posters"?

0 JohnTucker over 10 years ago in reply to JohnTucker

TI__Guru**** 191445 points

The tallest electrical component is the inductor... 5.5mm. The connectors are the actual tallest parts on the board ... 8.2mm. The pins are 3.6mm and may extend 2mm below the PCB.

0 sakthivel s over 10 years ago in reply to JohnTucker

Intellectual 620 points

post is mount the board. and we need top view, side view and front view of the board with dimension.

0 JohnTucker over 10 years ago in reply to sakthivel s

TI__Guru**** 191445 points

That EVM was not designed by our team. I will see if I can locate the database. I do not think there will be any drawings of the assembled board, only the blank PCB. If it was done in Altium, I can possibly generate a 3d view. You are probably best off to order an EVM and take the measurements you would like directly from it.

0 sakthivel s over 10 years ago in reply to JohnTucker

Intellectual 620 points

sir,
we already ordered for EVM board. for making further design we need dimensions.

Power management

Power management forum

dimensions