• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 63 subscribers
  • Views 270 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LM5122 adjustable Vout

Timothy Brandt
Prodigy 10 points
Other Parts Discussed in Thread: LM5122

Hello, I am wondering if anyone has done an adjustable Vout using PWM control with the LM5122. I have an 18V input with 2.5 A capable to supply. I would like to swing from 14V to 40 V using PWM. Any ideas would be appreciated.

  • 0
    TI__Guru 58171 points
    Hi
    If your PWM signal is strong enough, connect the PWM signal to FB pin through RC filter.
    If your PWM signal is weak, use a buffer and then connect the buffer output to FB through RC filter
    It will be PWM -> Buffer -> filter R-> filter C - resistor for Vout adjustment -> FB pin.
    Regards,