Hi sirs:
My customer have a question that how to set outpur current under 1A.
They change D+/D- connect as followings.
They use iPAD as device, but measure output current over 1A .
Do you have any suggestions for this case?Thank you.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Which device used, non A or A version, pleaes make sure customer used non-A version, because non-A default output D+/D-=2.7V/2.0V, when cross connection, D+/D-=2.0V/2.7V simulate apple 1A charging ID. As for the A version, both D+/D-=2.7V/2.7V.