TPS2420/ certification test of IEC60950-2

Tsukui Yusuke

Guru 21930 points

Other Parts Discussed in Thread: TPS2420

Hi,

Could you tell me about TPS2420?
Does TPS2420 clear a compliance test of IEC60950-2 ?
Customer is required to replace the fuse to TPS2420.
And Customer wants to be based on LPS standard.

If there is a Anex CC test report of IEC60950, give me it?

E-mail adress : tsukui-y@clv.macnica.co.jp .

Best Regards,
Yusuke/Japan Disty

over 10 years ago

0 Tsukui Yusuke over 10 years ago

Guru 21930 points

Hi Team,

Can I get the information ?
If you need more information or if I should clarify my comment ,

please let me know.

Best Regards,

Yusuke　/ Japan Disty

0 JCHK over 10 years ago

TI__Guru 50040 points

Hi Yusuke-san,

Here you go.

Regards,

TPS2420RSAR__dflfs05pwr_interfaceSafety CertificationCB_NEMKOCB_UL_P_test_report-Correction.pdf

0 Tsukui Yusuke over 10 years ago in reply to JCHK

Guru 21930 points

Hi John-san,

Thank you for your quick reply and support.
I will send the material to customer.

Thanks
Best Regards,

0 Tsukui Yusuke over 10 years ago in reply to Tsukui Yusuke

Guru 21930 points

Hi, John-san,

I get two requests from a customer.
Could you tell me about this recuest's answer.

◇Request1
Can I have the full version of the file which you gave to me?
Customer wants the report after the revision(Correction 1 2012-06-25).

◇Request2
IEC60950-1-am2 has been released.
Our customer is looking for current limit switch that complies with IEC60950-1-am2.
http://ewh.ieee.org/r6/ocs/pses/L&L_Am%202_60950-1_Ed%202_FINAL_07112014.pdf
Do you have a release schedule of the current limit switch that conforms to IEC60950-1-am2?

Best Regards,

Yusuke　/ Japan Disty

0 JCHK over 10 years ago in reply to Tsukui Yusuke

TI__Guru 50040 points

Hi Yuskue-san,

Here are the remaining reports:

TPS2420RSAR__dflfs05pwr_interfaceSafety CertificationCB_NEMKOCB_UL_P_file.pdf

TPS2420RSAR__dflfs05pwr_interfaceSafety CertificationCB_NEMKOCB_UL_P_test_report.pdf

TPS2420RSAR__dflfs05pwr_interfaceSafety CertificationCB_NEMKOCB_UL_P_file(1).pdf

Regards,

0 Tsukui Yusuke over 10 years ago in reply to JCHK

Guru 21930 points

Hi John-san,

Thank you for your support.
Let me ask you one more thing.
Could you tell me the plan corresponding to IEC60950-1-am2.
Customer is necessary to use it for a change of fuse.

Best Regards,
Yusuke　/ Japan Disty

0 JCHK over 10 years ago in reply to Tsukui Yusuke

TI__Guru 50040 points

Hi Yusuke-san,

eFuse has moved under HVAL. I will forward this to the team to see if they have a plan.

Regards,

0 JCHK over 10 years ago in reply to Tsukui Yusuke

TI__Guru 50040 points

HI Yusuke-san,

We see that IEC60950-1-am2 will become mandatory by 2019. We are checking to see what (if any) the differences our for us.

Regards,

0 Tsukui Yusuke over 10 years ago in reply to JCHK

Guru 21930 points

Hi Jhon-san,

Thank you for your support.
I hearing customer whether until when needs update to am2 .
I'll be waiting for your updating information.

Best Regards,
Yusuke　/ Japan Disty

0 Tsukui Yusuke over 10 years ago in reply to Tsukui Yusuke

Guru 21930 points

Hi Jhon-san,

I will deploy the information that I got from a customer.
Customer must correspond to IEC60950-1-am2 in 2016.
http://ewh.ieee.org/r6/ocs/pses/standardupgrade60950-1A2.pdf

In the case of correspondence in 2019, it lost.
I'll be waiting for your updating information.
Sorry for rush you.

Best Regards,
Yusuke　/ Japan Disty

0 Dinesh Kumar6 over 10 years ago

TI__Intellectual 2980 points

Hello Yusuke-san,

The TPS2420 is UL verified and need to get information if it covered IEC60950

Regards

Dinesh

Power management

Power management forum

TPS2420/ certification test of IEC60950-2