• State Answer Suggested
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 63 subscribers
  • Views 475 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Power consumption of BQ27621

AntonNadezhdin
Intellectual 420 points

Hi TI, 

I have a question about the power consumption of BQ27621: We created a test PCB with this gauge, necessary capacitors and 10 kOhm pull down resistor at BIN, after that we connected VBAT and GND and measured the average supply current. It was about 70 uA, but the datasheet says that the maximum supply current is 27 uA, Why such a big difference in values?

Why such a big difference in values