EVM board of TPS7B6701EVM

Takao Yamamoto

Genius 4135 points

Other Parts Discussed in Thread: TPS7B6701EVM

Dear all,

I would like to know about this EVM type.

I understand this EVM is double-side board.

Is this EVM type CEM3?

Best regards,

over 10 years ago

0 Eric Hackett over 10 years ago

TI__Guru 74292 points

Yamamoto-san,

The appropriate applications engineer has been notified of your question, and will respond accordingly.

Regards,
Eric Hackett

0 Jason. Liu over 10 years ago

TI__Expert 5675 points

Yamamoto-san,

PCB material we used is the most commonly used FR4.
CEM-3 is very similar to FR4. Its color is white and it is flame retardant.

Best regards,
Jason Liu

0 Sophak over 8 years ago in reply to Jason. Liu

Prodigy 10 points

Hello Jason,

I'm new to this e2e community. I like to use your TPS7B6701EVM as a power source for my project, but I'm not sure if it 's going to fit in my small package enclosure.

Do you have the board dimensions L x W x H? including the tallest components.

Thanks,

Sophak

0 Ryan Eslinger over 8 years ago in reply to Sophak

TI__Guru 55940 points

Hi Sophak,

The board dimensions are 2.1 inch by 1.8 inch. The tallest components are C1 and C3 which are EMVH350ADA470MHA0G. Per Digikey these parts are 0.394 inches tall.

Please note that the EVM is intended for evaluation purposes only.

Very Respectfully,
Ryan

Power management

Power management forum

EVM board of TPS7B6701EVM