bq Fuel Gauge PCB Redesign

Invalid User :-)

I have redesigned my PCB, component wise, not significantly but it is a new layout. Would it be a good idea to run cycles to characterize it or is my old golden pack still valid? The FETs and Rsense haven't changed, just the layout.

over 10 years ago

0 ThomasCosby over 10 years ago

TI__Guru 73830 points

The cell voltage contacts should be close to kelvin, so they should not affect the Ra table much. if the layout change is not significant, then the old golden file should be okay.

0 Invalid User :-) over 10 years ago in reply to ThomasCosby

Intellectual 755 points

Excellent! That is what I was thinking but wanted to verify it with you.

Power management

Power management forum

bq Fuel Gauge PCB Redesign