• State Resolved
  • Locked Locked
  • Replies 4 replies
  • Subscribers 65 subscribers
  • Views 20733 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LM2596 ADJUSTABLE IC SIMULATE LIBRARY

sameera aravinda
Prodigy 30 points
Other Parts Discussed in Thread: LM2596, LM43603, LMR14030

MY DEAR ALL FRIEND :

PLEASE SUPPORT ME. SO I HAVE LM2596 ADJUSTABLE VOLTAGE CIRCUIT . SO I WANT THAT SIMULATE NI MULTI SIM OR PROTEUS SOFTWARE. BUT THAT LM2596 IC LIBRAY NOT INCLUDING THAT SOFTWARE'S.

WHAT I DO ? I HAVE SCHOOL PROJECT THAT SIMULATION SOFTWARE..

 HELP ME WHAT IS THAT LIBRARY FOR LM2596 

THANKS. SAMEERA-SRI LANKA

  • 0
    TI__Genius 15810 points

    Hello,
    MultiSIM or Proteus are not supported softwares. Unfortunately the only way you can design with LM2596 is by using Webench. But since the device is very old it is not completely supported there either. You can create a design and get a BOM but there are not electrical SIM support. Have you considered using some of the newer DC/DC buck regulators like the LM43603 or the LMR14030? These are the newer devices of the same family of SIMPLE SWITCHER regulators.
    Regards,
    Akshay

  • 0 in reply to Akshay Mehta
    Prodigy 30 points

    thanks mr Akshay..

     thank you very much. so if i have any problem , i want helps...

    so i have one problem mr Akshay.... i want to some circuit design and simulate . but some most software is not support simulation .

    example is : my some circuit is i want cheq that working or not working . if working then can design pcb design. but if my circuit not realy working then pcb is wrong.

    so i want to success that relay working through simulation software. please can say what is recommended simulation software 

    thanks- sameera

  • 0
    TI__Mastermind 19891 points

    Hello Sameera, 

    I don't know if a standalone model is available. One thing you can try is explore the LM2596 using out WEBENCH tool. 

    Go to the device product folder: 

    and on the right hand side you will see a panel that says WEBENCH® LM2596. 

    Input your conditions there and click on Open Design. This will take you into WEBENCH and will create a design based on your requirements. There you will find performance charts and calculated operating values. 

    Good luck with your school project. 

    Cheers, 
    Denislav

  • 0 in reply to Denislav Petkov
    Prodigy 30 points

    thanks Denislav.

    thank you very much for reply to me.  but can any circuit design or simulate by WEBENCH. i try to knight rider circuit simulate by WEBENCH. i cant understand what which use that circuit for webench..............

    thanks sameera-srilanka