HI, we would like to use SwitherPro to design a 3.6V->6V booster. We had previously done so with TPS61087 and it gave us great results. Unfortunately TPS61088 is missing from the database.
Is there a trick to add it or is there some update available? We would follow the ref design but are not 100% confident we know what/what to change to get Vout=6V
Alternatively, could you recommend a TPS family part that that is available in SwitcherPro that can be used to designs booster with the following parameters:
Vin 3.6-4.2V (Single cell lipo)
Vout 6V
Iout max: 4A
Thank you