• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 63 subscribers
  • Views 430 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS63050 PFM/PWM efficiency graphs reversed

Martin Hofmann
Prodigy 80 points
Other Parts Discussed in Thread: TPS63050

On page 12 in the TPS63050 datasheet is stated that "power save mode is disabled by setting PFM/PWM pin high".

Also, on page 3: PFM/PWM = High   (forced-PWM mode)

On page 18 when comparing the efficiency graphs I think they are reversed:

  • Figure 15 & 17. PFM/PWM = High   -> efficiency at light loads is good
  • Figure 16 & 18. PFM/PWM = Low    -> efficiency at light loads is worse

This would mean that power save mode makes no sense?