LMZ31506 AGND to PGND connection

Steve Tam

AGND is being connected to PGND on the top layer of my board as shown in the picture below. Are the voids between pins 36-38 ok? I'm concerned that filling those voids will make it difficult to solder down the part.

Thanks for the help,

Steve

over 10 years ago

0 Anston Lobo over 10 years ago

TI__Genius 16025 points

We've received your query and will get back to you shortly.

Thanks,
Anston

0 J Arrigo over 10 years ago

TI__Mastermind 28020 points

Hi Steve,
I do not see and images in this post. Please send me a email at jarrigo@ti.com with the image of the layout.
Thanks, Jason

0 J Arrigo over 10 years ago in reply to J Arrigo

TI__Mastermind 28020 points

I would recommend filling those voids to make a good PGND connection to the PCB.

Power management

Power management forum

LMZ31506 AGND to PGND connection