TPS2379EVM Altium or Cadence files

Newton Cardoso

Intellectual 745 points

Other Parts Discussed in Thread: TPS2379

Dear TI staff,

Would you kindly make available TPS2379EVM design files, in Altium (preferably) or Cadence format?

Best wishes,

over 10 years ago

0 Eric Wright over 10 years ago

TI__Mastermind 42795 points

TPS2379 was done in PADS. ALtium can import and convert PADS files. Would that work?

0 Newton Cardoso over 10 years ago in reply to Eric Wright

Intellectual 745 points

Hello Eric,

Yes, PADS format is suitable.

Best wishes,

0 Eric Wright over 10 years ago in reply to Newton Cardoso

TI__Mastermind 42795 points

I've attached the PADS files for PCB, SCH, and PCB ASCII. Altium will use the ASC version for PCB import and the TXT (for the schematic) for schematic import. I could not find the .TXT version and we no longer have access to PADS. Are you able to open the PADS schematic and export to the .TXT format for Altium import?

PWR106A.zip

0 Newton Cardoso over 10 years ago in reply to Eric Wright

Intellectual 745 points

Hello Eric,

I succeeded in converting PCB file, but not SCH file. Could you send SCH file again, maybe it could be corrupted.

Best wishes,

0 Eric Wright over 10 years ago in reply to Newton Cardoso

TI__Mastermind 42795 points

I think we need the ASCII equivalent of the SCH file (it is a TXT extension as I recall). I will try and find someone to export the TXT format and send it your way.

0 Eric Wright over 10 years ago in reply to Eric Wright

TI__Mastermind 42795 points

Please give this a try.

PWR106C.txt

Power management

Power management forum

TPS2379EVM Altium or Cadence files