• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 63 subscribers
  • Views 381 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS63060 Power-Save mode operation

Rafael Guedes Lang
Prodigy 10 points
Other Parts Discussed in Thread: TPS63060, TPS62150

I have a particular need to operate the TPS63060 with very low loads (around 50-100 mA) at 3-12 Vin and 3.3Vout.

The IC provides the Power-save operation mode.

My question is quite straight-forward: should I use it with PS/SYNC set low (power save enabled) or high (disabled)?

Thanks in advance