About TPS1H100-Q1

Luna

Intellectual 870 points

Other Parts Discussed in Thread: TPS1H100-Q1

Dear Sirs,

Please tell me about TPS1H100-Q1.

Is this possible to use a stand-alone?

Sincerely,

Sakuma

over 9 years ago

0 Aleksandras_Kaknevicius over 9 years ago

TI__Genius 15780 points

Hi Sakuma,

I have contacted the appropriate engineer and he should get back to you shortly.

Thanks,

Alek Kaknevicius

0 Alex Wang (LED) over 9 years ago

TI__Intellectual 1150 points

Hello, Sakuma,

I'm the guy in charge of this part.
Would you give me a detailed description of your question?
Thanks,

Alex,

0 Luna over 9 years ago in reply to Aleksandras_Kaknevicius

Intellectual 870 points

Dear Mr. Alek Kaknevicius

Thank you for your immediate reply.
I'm grateful.

Yours Sincerely,

Sakuma

0 Luna over 9 years ago in reply to Luna

Intellectual 870 points

Dear Mr. Alex

Thank you for your immediate reply.

The recommended circuit is written in the data sheet, TPS1H100-Q1 has been controlled by the MCU.
I want to control without using the MCU as TPS229xx series.

The reason to choose the TPS1H100-Q1 is for the voltage of the power supply line of 12V.

Your Sincerely,

Sakuma

0 Alex Wang (LED) over 9 years ago in reply to Luna

TI__Intellectual 1150 points

Sorry for the late response.

Yes, it definitely can be used without MCU. If possible, please send me the schematic you'd use for this part, I can re-check for you.

Email: alex.wang@ti.com

Thanks,

Alex,

0 Luna over 9 years ago in reply to Alex Wang (LED)

Intellectual 870 points

Dear Mr. Alex

Thank you for your reply and I'm sorry reply become slow.

I've understand that can controlled without MCU.

Now, it is being proposed TPS1H100-Q1.

Once the customer is actually considering, Please let consultation.

Your Sincerely,

Sakuma

Power management

Power management forum

About TPS1H100-Q1