LMZ14203 files

alvaromartineztovar

Other Parts Discussed in Thread: LMZ14203

Dear all,

I would like to know where to find the Orcad/Cadence files for the EVAL board for this device. I have read in the Application note "AN-2024 - LMZ1420x/LMZ1200x Evaluation Board", on page 8 that "Gerber and CAD files can be download from the LMZ14203 product folder" but I am not able to find them.

Thank you very much for your help!

alvaro

over 9 years ago

0 Frank De Stasi over 9 years ago

TI__Guru 72035 points

I will pass this to the apps engineer that worked on this device. I will try to get you the files and also have them posted.

0 alvaromartineztovar over 9 years ago in reply to Frank De Stasi

Prodigy 50 points

Thank you very much!

0 Frank De Stasi over 9 years ago in reply to alvaromartineztovar

TI__Guru 72035 points

I have posted the Gerber files to this post

3162.SV600346C_Gerber.zip

0 alvaromartineztovar over 9 years ago in reply to Frank De Stasi

Prodigy 50 points

Thank you very much for the posted files. The gerber files are really helpful for the layour design. However, I made a mistake for what I would like to have (if possible) are the dra file for Allegro and the symbol for Orcad,

Thank you very much for your collaboration.

Regards,

0 Frank De Stasi over 9 years ago in reply to alvaromartineztovar

TI__Guru 72035 points

We use Altium for our EVMs. I have attached the Altium files.

If you need a different format you may be able to go to Webench and download a typical layout from that tool. It will not be the same as the EVM.ALTIUM_14203_Module_AM2 (6-4-2010 11-02-53 AM).zip

0 alvaromartineztovar over 9 years ago in reply to Frank De Stasi

Prodigy 50 points

Thank you very much for your fast and precise answer!

Best regards,

Power management

Power management forum

LMZ14203 files