BQ24650 - TS Pin - Can be disabled?

Vijay Anand

We don't want to use the thermistor based feature to control the charging process according to battery temperature. Can we disable this feature?

over 9 years ago

0 Steven Bangdiwala over 9 years ago

TI__Expert 8690 points

Hi Vijay,

To trick the TS pin, you should have roughly 60% of VREF at VTS. Use 6.8k resistor from VREF to TS and 10k resistor from TS to GND.

Thanks,
Steven

0 Vijay Anand over 9 years ago in reply to Steven Bangdiwala

Prodigy 160 points

Thanks Steven.....This information will be useful to us.

Power management

Power management forum

BQ24650 - TS Pin - Can be disabled?