• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 63 subscribers
  • Views 849 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

bq34z100-g1 and I2c commands and subcommands

MickaelWhite
Prodigy 240 points
Other Parts Discussed in Thread: BQSTUDIO

Hi,

I try to perform the sequence of commands got with the link

http://e2e.ti.com/support/power_management/battery_management/f/180/t/213060 

in read/write I2C byte mode, using Advanced Comm I2C of bqStudio,

With  standard commands, it's all right. But with subcommands, I always read the control status and never the Chem_ID for example.

Can you explain how performing subcommands.

Thank