Hi all.
I have a question about CSD95378B5M.
The PWM terminal of this device has internal pull up or pull down resistance?
Best Regards,
Sho Ogane
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi Brett san
Thank you for the reply.
I understood this device has internal pull up and pull down resistor.
Which resistor(pull up or pull down) does this device have internal PW pin?
And please tell me the value of the internal resistor.
Best Regards,
Sho Ogane
Hi Brettt san
I understood the following your comment.
→"There is actually an internal pull up and a pull down resistor"
I would like to know values of internal pull up and a pull down resistor.
Please give us your answer as soon as possible, sorry.
Best Regards,
Sho Ogane
I am not sure I understand your question, "which resistor does this device have internal PW pin?"
The PWM pin is attached to both the pull up and pull down resistor internally.
Hi Brett san
Thank you for the reply.
I understood this device has both pull up and pull down resistor.
Low input → pull down
Hi input → pull up
Floating → tri-state
Can I get information the value of resistor?
My customer ask us the value.
I think the value is 10k~100k, but I can't calculate because I don't know sink current.
Best Regards,
Sho Ogane