BQ76PL536A

Hi Gautam,

Let me ask you few questions.

1. You have to make sure you clear the Alert register. If not then it will consume about mA of power consumption.

2. What is the status of CS_H pin? You need to make sure CS_H is asserted (high).

3. Check the Fault register as well. Make sure it's clear too.

4. Do you have idea how much cells are discharged? do you know before and after SOC.

5. I can review the schematic if you like. you can contact me privately if you want to share the schematic.

Let me know then I can give you some responds.

thanks