Hi
Is it possible to use the LM3410Y (525kHz) as a Sepic driver for V_pwr 7V to 9V (and V_IN 3.3V)?
That means: V_pwr > V_in (like Figure 38 in Datasheet).
Thanks.
Best regards
Pascal
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi
Is it possible to use the LM3410Y (525kHz) as a Sepic driver for V_pwr 7V to 9V (and V_IN 3.3V)?
That means: V_pwr > V_in (like Figure 38 in Datasheet).
Thanks.
Best regards
Pascal