TPS60130 with >300 mA load

Benjamin Moore

Other Parts Discussed in Thread: TPS60130

Team,

If a TPS60130 is placed directly across an LED sourcing greater than 300mA will the charge pump Vout just sag down or shut down due to over current?

Thank you,

Ben

over 9 years ago

0 Michael Helmlinger over 9 years ago

TI__Expert 5055 points

Hi Ben,

The Vout will go down. 300mA output current is guaranteed over all parameters as stated in the spec table.
If Vout is 0V (short circuit) the current is limited to typ. 115mA.

Regards,
Michael

Power management

Power management forum

TPS60130 with >300 mA load