LP5912

Michael Holyoak

Prodigy 120 points

Other Parts Discussed in Thread: LP5912, LMX2492, LP5900

Hello,

When will the LP5912 be available?

Cheers,

Mike

over 9 years ago

0 Donald Jones over 9 years ago

TI__Mastermind 22610 points

Schedule shows RTM during second week of February 2016

0 Michael Holyoak over 9 years ago in reply to Donald Jones

Prodigy 120 points

Hi Donald,

Thanks for the quick response - any idea when it will be released to distributors?

-Mike

0 Donald Jones over 9 years ago in reply to Michael Holyoak

TI__Mastermind 22610 points

Outside my perimeter, that's a Marketing call, but I would presume we would do it all at the same time. No reason not to.

Although there would be some time needed (hours, days?) to get all the distributors 'availability' and 'inventory' databases sync'ed up.

0 Mohan Padmanaban over 9 years ago in reply to Donald Jones

TI__Prodigy 70 points

There are quite a few distis that need to be sticked with all the volateg versions. We plan to complete all stocking with 6-8 weeks across all distis. Please feel free to let me know how we can support meanwhile.

0 Michael Holyoak over 9 years ago in reply to Mohan Padmanaban

Prodigy 120 points

Are you sampling the device now? Any chance you have a demo board for it?

0 Mohan Padmanaban over 9 years ago in reply to Michael Holyoak

TI__Prodigy 70 points

Please check the following link for EVM
store.ti.com/Search.aspx

0 Michael Holyoak over 9 years ago in reply to Mohan Padmanaban

Prodigy 120 points

Hi Mohan,

So the datasheet says the part will be available in fixed voltages from 0.5 to 5.5V in 0.25V increments .. I don't see a P/N assigned to the device with a 5V output .. will there be one? This is what I am interested in.

Thanks,

Mike

0 Mohan Padmanaban over 9 years ago in reply to Michael Holyoak

TI__Prodigy 70 points

Hi Michael,

Thanks for your interest. We are potentially looking into the 5V option and few others that we have started to see interest. No committed timeframe yet as we are in the preliminary stages still on these additional voltage options

Can you please background to your application and 5V rail need. Thanks

0 Michael Holyoak over 9 years ago in reply to Mohan Padmanaban

Prodigy 120 points

I'm looking for a very low noise 5V supply for the charge pump of the LMX2492. I am using the LP5900 for its 3.3V requirements, but would really like to supply the CP with 5V. This circuit will be included in a new mm-Wave communications platform that LGS is currently developing.

Thanks,

Mike

Power management

Power management forum

LP5912