b40Z50-R1 factory/default senc/srec

Matt Palmer

Other Parts Discussed in Thread: BQ40Z50-R1

does someone have the factory default senc/srec for the 40z50R1? I have some test mules that I would like to start over from scratch on.

Thanks!

-Matt

over 9 years ago

0 ThomasCosby over 9 years ago

TI__Guru 73830 points

Matt,
The srec can be download from the bq40z50-R1 website.
Tom

0 Matt Palmer over 9 years ago in reply to ThomasCosby

Intellectual 450 points

i'm getting a 413 Request Entity Too Large

the requested resource
/general/docs/mytilit/doclitexportcontrol.tsp
does not allow request data with GET requests, or the amount of data provided in the request exceeds the capacity limit.

when i try and download it.

0 Fernando Lopez over 9 years ago in reply to Matt Palmer

TI__Expert 8230 points

Hello Matt,

The "Request Entity Too Large" error usually means the browser you are using ran out of memory to handle the download request. I've seen this happen before, specially on Chrome. Try closing tabs or reopening your browser and try again downloading the file.

Power management

Power management forum

b40Z50-R1 factory/default senc/srec