In your datasheet you have a application drawing or two with a R11 and C6 going from the output to ground. There are no notes on why or how these should or could be used. How do I use these and how do I pick values?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
In your datasheet you have a application drawing or two with a R11 and C6 going from the output to ground. There are no notes on why or how these should or could be used. How do I use these and how do I pick values?