• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 63 subscribers
  • Views 705 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

About Vout startup of LM43602 (External clock or not)

Satoshi
Guru 19645 points
Other Parts Discussed in Thread: LM43602

For LM43602, is Vout startup varies by external clock or not(unused sync pin)?

※Foe example, start up time, transition, etc.

Or, are these condition(clock) not matter for Vout? 

Best regards,

Satoshi

  • 0
    TI__Genius 15810 points
    Hello,
    The startup time of VOUT can be adjusted by the capacitor connected to the SS (softstart) pin. The default soft start time is about 4.5 ms. This will also be the minimum softstart time. SYNC pin or the external clock has no bearing on softstart.

    Regards,
    Akshay