Programming UCD9224E

There can be several ways to program the device. In general, the steps are: (1) Find out which method the programmer uses to program the device, (2) Use Fusion Digital Power Designer GUI to export the file corresponding to the programming method, (3) Use the programmer to program the device. 

In Step (3), the programmer needs to communicate with the device following a certain procedure. The detailed script recipe is described in the attached document. 

3323.Configuration Programming of UCD Devices.pdf

Regards,

Zhiyuan

Hi,
1) I have generated the HEX files (intel hex mode) in online mode using the TI Fusion tool as suggested in the document
Here the file content. Can you explain how to interpret the data ? i am looking for the data flash address.
------------------------------------------------------------------------------------------------------------------------
:020000040001F9
:2088000003F3087503990005004E0FF2000000008410410404033C3B0409084C03AD000588
:20882000004E0FF200000000841C81C804033C3B03E508F5032E000103E900170000000068
:20884000841C81C804033C3B02D10ABE0273000400970FE9000000008410410404033C3BB7
:2088600002D40AB90275000400970FE900000000841C81C804033C3B03E508F5032E0001D7
:2088800003E9001700000000841C81C804033C3B11323230313137333520202020202020E8
:2088A0002020000B32323031313733355033200003322E305F5245564953494F4E0557492F
:2088C00050524F4F434154494F4E06313130333136073339445F574933000000000020550A
:2088E0007365725F446174615F303020202020202020202020202020202020202020200016
:20890000359509AC400080003C002800240000002800240000000144000001FF00010000FE
:2089200000010000121100000000CD000000C6D60000000000000000000001FFFFFFFFFFAE
:20894000FF0000000000000000000000000000000000000000000000000000000000000018
:2089600000000000140034CC133300000000000000003A14151F377014293228123D00632B
:2089800000011F0E4F381F0E4F387E757E75001E001E000000004B0800004B082CE1105138
:2089A0002F85114700000000006400640000000000000000000000840084000000013A148C
:2089C000151F8185390614BC309311AA2F851148393D04840B60C0002DEF10B4808003A611
:2089E0000930FEDBFD1D00002D002D0000002800280000E400E410000000050000000300C1
:208A000000000000FF80000000007FE00000053606900000000000000000000000000000A7
:208A20000666066600000000000000000000000001A401A401A40000FD60FD60FD60000058
:208A40000000000000000000000000000000000058C021DCFFFFFFFFFFFFFFFFFFFFFFFF0D
:208A6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF16
:208A8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF6
:208AA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD6
:208AC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFB6
:208AE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF96
:208B0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF75
:208B2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF55
:208B4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF35
:208B6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF15
:208B8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5
:208BA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD5
:208BC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFB5
:208BE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF95
:208C0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF74
:208C2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF54
:208C4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF34
:208C6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF14
:208C8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF4
:208CA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD4
:208CC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFB4
:208CE000020000000000000000000000000000000000000000000000FFFFFFFFFFFFFFFF7A
:208D0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF73
:208D2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF53
:208D4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF33
:208D6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF13
:208D8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF3
:208DA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD3
:208DC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFB3
:208DE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF93
:208E0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF72
:208E2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF52
:208E4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF32
:208E6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF12
:208E8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF2
:208EA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD2
:208EC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFB2
:208EE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF92
:208F0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF71
:208F2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF51
:208F4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF31
:208F6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF11
:208F8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF1
:208FA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD1
:208FC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFB1
:208FE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF91
:00000001FF
------------------------------------------------------------------------------------------------------------------------

2) As per the “Configuration Programming of UCD Devices” , the data flash address is 0x00018800, 2KB
But in the file content above, I could not see the above addresses ??

3) Finally how to pre-program the above generated Hex file using the following programmer to UCD9224ERGZR device?

Programmer Make :Elnec
Model :Beehive204
Adapter : DIL48/QFN48 ZIF UCD – 1

Hex file is a image of data flash. No need to interpret it.

The file is in Intel Hex format. Address information is included in the file. Intel Hex format is introduced in the link below.
en.wikipedia.org/.../Intel_HEX

TI does not support programmer. But I have seen customer using this programmer. Please contact programmer manufacturer for support.

Hi,

Can you please let me know what the registers 0000018CC0 to 0000018CF0 of Data flash refers ?

We observed the differences at these locations of data flash between expected data VS read back data from the IC using the programmer.

Device 1 with 65D address:

Expected data at the registers :

Register: 0000018CC0; Data: 02000000000000000000000000000000
Register: 0000018CD0; Data: 0000000000000000FFFFFFFFFFFFFFFF
Register: 0000018CE0; Data: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
Register: 0000018CF0; Data: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF

Read back data from the IC using the programmer:

Register: 0000018CC0; Data: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
Register: 0000018CD0; Data: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
Register: 0000018CE0; Data: 02000000000000002000000000000000
Register: 0000018CF0; Data: 0000000000000000FFFFFFFFFFFFFFFF

Device 2 with 39D address:

Expected data at the registers :

Register: 0000018CC0; Data: 02000000000000000000000000000000
Register: 0000018CD0; Data: 0000000000000000FFFFFFFFFFFFFFFF

Read back data from the IC using the programmer:

Register: 0000018CC0; Data: 01000000000000001F00000000000000
Register: 0000018CD0; Data: 0000000000000000FFFFFFFFFFFFFFFF

Can we ignore the above differences?

Thanks and Regards
G R K Nagaraju

Yes. You can ignore. This is fault log area.

If you want to compare configuration differences, you can export project files from each device, and compare the project files in Fusion GUI ->Tools-> Device/Project Configuration Compare feature.

Before you export Hex file, we recommend clear logged fault first.

Hi,

Can you let me know what is the range of the registers that refers logged faults ?

if you can share the details for the registers of the data flash , that would be great.(0000018800 to 18FFF)