TPS53319 EVM CAD data

K. Sasaki14

Guru 10200 points

Could you provide TPS53319EVM CAD data?
Our customer requires Allegro file.

Best Regards,
Kohei Sasaki

over 9 years ago

0 JohnTucker over 9 years ago

TI__Guru**** 191445 points

The CAD data is available here:

www.ti.com/.../quality

You can also export schematic and PCB data from Webench in various formats. Allegro is supported there.

0 K. Sasaki14 over 9 years ago in reply to JohnTucker

Guru 10200 points

John-san,

I exported Allegro CAD data by WEBENCH. However I couldn't see board pattern.
There was blank_Board.Brd file. How can I see the CAD data?
Could you tell me the procedure?

Best Regards,
Kohei Sasaki

0 JohnTucker over 9 years ago in reply to K. Sasaki14

TI__Guru**** 191445 points

There is a read me file with instructions. The blank file will be built up by a batch script file. let me know if you have further difficulty.

0 K. Sasaki14 over 9 years ago in reply to JohnTucker

Guru 10200 points

John-san,

Thank you for your response.
Can't we see PCB file with Allegro free viewer? Is it needed Allegro PCB Design?

Best Regards,
Kohei Sasaki

0 JohnTucker over 9 years ago in reply to K. Sasaki14

TI__Guru**** 191445 points

Were you able to build the files using the batch script?

0 K. Sasaki14 over 9 years ago in reply to JohnTucker

Guru 10200 points

John-san,

I double clicked .bat file in Allegro folder. However "Expected file "RX44Y57D0T.pad" not found" message appeared.
So I think I was not able to build file.

Best Regards,
Kohei Sasaki

0 JohnTucker over 9 years ago in reply to K. Sasaki14

TI__Guru**** 191445 points

Let me see if it will build for me.

0 K. Sasaki14 over 9 years ago in reply to JohnTucker

Guru 10200 points

John-san,

What information should I provide you?

Best Regards,
Kohei Sasaki

0 JohnTucker over 9 years ago in reply to K. Sasaki14

TI__Guru**** 191445 points

I was able to successfully create a BRD file using the batch program. It does in fact open in the free viewer. It has a lot of extra "stuff" in it though.

0 K. Sasaki14 over 9 years ago in reply to JohnTucker

Guru 10200 points

John-san,

Could you let me know your procedure?
Is there the rule of save place of Allegro folder which is exported from WEBENCH? I have put the folder on desktop now.
Does your PC have Allegro PCB Design?
Is the BRD file created by double click of .bat file?

Best Regards,
Kohei Sasaki

0 JohnTucker over 9 years ago in reply to K. Sasaki14

TI__Guru**** 191445 points

Yes, I just executed the batch file. It should open allegro. It takes quite a long time to run. There is a read.txt file with details.

0 K. Sasaki14 over 9 years ago in reply to JohnTucker

Guru 10200 points

John-san,

Does your PC have Allegro PCB Design? If I don't have this on my PC, can't I create BRD file?

Best Regards,
Kohei Sasaki

0 JohnTucker over 9 years ago in reply to K. Sasaki14

TI__Guru**** 191445 points

Yes you have to have Allegro PCB on your computer. It is actual Allegro that "builds" the BRD file from the contents of the ZIP file. Contact me directly and I'll send you the BRD file.

Power management

Power management forum

TPS53319 EVM CAD data