3.3V supply using TPS 53353

Gokul Krishnan43

Hello!

I required a 3.3V 10A output design. I have sued the TPS 53353 for the same. I wanted to know the correctness of my design and also what package of the resis tors need to be used in this design. I am attaching the ppdf of my design.

Regards

Gokul

over 9 years ago

0 JohnTucker over 9 years ago

TI__Guru**** 191445 points

Please upload the schematic. Also provide any design equations you used to determine the component values. For resistors, I typically use E96 1% resistors in 0603 package, but you can certainly use others as well.

0 Gokul Krishnan43 over 9 years ago in reply to JohnTucker

Prodigy 30 points

Hey I used the equations in the datasheet. Nothing specific. I wanted to know if the deisgn would work and yes I also used 0603 here. But do any of them require 0805 ? And the schemtaic is attached.

0 Gokul Krishnan43 over 9 years ago in reply to Gokul Krishnan43

Prodigy 30 points

Hello Can anyone help me with the review of the circuit that I had posted in the previous post.

Regards

Gokul Krishnan

Power management

Power management forum

3.3V supply using TPS 53353