TPS65400 ENSWx

Hirotsugu Kobayashi

Other Parts Discussed in Thread: TPS65400

Hi, all

Please tell me the maximum input voltage of a ENSWx terminal for tps65400.
A data seat has described VDDD or 3.6V, is it the lower applied?

over 9 years ago

0 JohnTucker over 9 years ago

TI__Guru**** 191445 points

VDDD is a 3.3 V regulated output (typically 3.2 V). You can pull ENSWx up to that voltage. If you use another source, the abs max voltage is 3.6 V. You should probably use either VDDD or another 3.3 V source.

0 Eric Guo1 over 9 years ago in reply to JohnTucker

TI__Intellectual 2590 points

For the ENable up and close votlage, you can find it in EC table for detail. Make sure Enable high volage less than 3.6V.
thanks!

Power management

Power management forum

TPS65400 ENSWx