BQ20Z80 Windows 10 x64 USB driver for BQEVM

hi Steve

Unfortunately, all our systems at TI is on windows 7, so drivers were written support such. Let me check with our tools team and get back to you on windows 10 support.

thanks

Onyx

Hello Steve,
I was told that by using this 64 bit driver in the link below, you should be able to have ev2300 work with windows 10. pls try this and let me know otherwise, i am afraid you will have to look to use a 32bit windows 7 computer or you will have to get an ev2400 to use with you board.

e2e.ti.com/.../458983.aspx

thanks
Onyx

Hi Onyx,

Thanks for the link.  I'll give it a try, hopefully today, and let you know.  We also have the EV2400.  I have tried to use it but with no success.  Will you please provide a link for the EV2400 "BQ20Z80 compatible" Windows 10 x64 USB driver?  I prefer to use the EV2400 (latest and greatest).

Regards

Steve

hi Steve,

The EV2400 automatically installs its drivers once you plug it in. Just make sure the firmware on your ev2400 is the latest. see link below to the latest firmware for it.

thanks

Onyx

Thanks again Onyx for the prompt reply. I have downloaded the firmware updater utility. Once last request (I hope). I have a hard time finding the BQEVM software down link. The BQ20Z80 tool folder doesn't show a link. Three software utilities are shown but not the EV software. Will you provide a link to the current BQEVM please (BQ20Z80 V110) ?

See attached.

https://e2e.ti.com/cfs-file/__key/communityserver-discussions-components-files/196/bqEV_2D00_EasySetup00.09.36_5F00_z80v110z90v110z95v100z70v115z75v115.exe

thanks

Onyx