UCC29002

Hi Jacob,

Gives us a couple of days to look through our applications library and we will get back to you.

Regards

Peter

28V_SHARE.pdfThe issue with using the UCC29002 with a 28V power supply is that the max supply voltage for this part is 15V.

You can use the attached schematic as an example of how to use the controller at voltages above 15V

Sorry it is not a complete reference design but it will show you how to implement the sharing function.

Regards,

John Griffin

Hi 

TNX a lot 

do you have thecorrect equation to calculate all the othetr components loke R adj with the transistor ?

BR 

Jacob 

I don't have a complete reference design but setting the extra component values is fairly straight forward.
The zener can be a 12V value and the bias resistor is sized to set a minimum (1-5mA) through the zener.
The NPN transistor is a small signal part such as a 2N2222A
You the calculator tool or data sheet for the rest of the component values
Regards,
John Griffin