• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 63 subscribers
  • Views 628 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Regarding bq34z100-g1 learning cycle

AKHILA ELURI
Prodigy 70 points
Other Parts Discussed in Thread: BQ34Z100-G1

Hi TI Team,

We performed learning cycle for bq34z100-g1 using 12V 7Ah PbA battery.Complete charge and discharge cycles were done but still no change in Learned status,Update status,Max Error.Could you please go through the below attached log file and correct us where we had gone wrong.

LearningCycle_Log.log

  • 0
    TI__Mastermind 27145 points
    Hi Akhila,

    Did you send an IT_ENABLE command and did the update status register change to 0x04 before the start of the test? Also could provide some detail about your test setup? There seems to be some spikes in your voltage, current and temperature waveforms.

    Best Regards,
    Ben Lough