• State Resolved
  • Locked Locked
  • Replies 3 replies
  • Subscribers 64 subscribers
  • Views 772 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS62130's Power Good signal

Tomo
Prodigy 210 points
Other Parts Discussed in Thread: TPS62130, TPS62130AI'm going to use TPS62130 to our custom board. (Not TPS62130A) I have a question about PG pin operation. When EN pin goes high, does PG pin goes low until output voltage is proper? Best regards, Tomo