• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 63 subscribers
  • Views 498 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS62740 size pullup resistor (10Mohm) at EN pin

Olrik Maier
Expert 5020 points
Other Parts Discussed in Thread: TPS62740

Hi,

my cst is using TPS62740.

We would like to use the EN pin to switch ON/OFF the system, therefore we need to use a high pull down resistor e.g.10Mohm in order to reduce leakage current in ON mode.

Is 10 Mohm possible ?

 

Best wishes,

Olrik