Power management

Power management forum

State Resolved
Locked Locked
Replies 5 replies
Subscribers 63 subscribers
Views 1127 views
Users 0 members are here

Support feedback

Options

Options

Related

TPS7a84

Alex Medina

Intellectual 340 points

Other Parts Discussed in Thread: TPS7A84

Hi, We want to use heat sink with TPS7a84 LDO and attach it using push-pin and springs. In order to decide on spring specifications, we need to know the maximum allowable force/pressure for TPS7a84. (https://www.micforg.co.jp/en/cat_sespringe.html) We could not find this data anywhere in datasheet or website. Thanks and regards, Alex

over 9 years ago

0 Ryan Eslinger over 9 years ago

TI__Guru 55940 points

Hi Alex,

We will respond on the next US business day.

Very Respectfully,
Ryan

0 Alex Medina over 9 years ago in reply to Ryan Eslinger

Intellectual 340 points

Hi, Ryan!
Thank for your reply, I will wait for the answer!

Best regards, Alex

0 Ryan Eslinger over 9 years ago in reply to Alex Medina

TI__Guru 55940 points

Hi Alex,

We are still looking into the answer and will reply as soon as possible.

Very Respectfully,

Ryan

0 Ryan Eslinger over 8 years ago in reply to Ryan Eslinger

TI__Guru 55940 points

Hi Alex,

I apologize for the delay. We tested on the EVM up to 300N.

Very Respectfully,
Ryan

0 Alex Medina over 8 years ago in reply to Ryan Eslinger

Intellectual 340 points

Hi, Ryan!

Thank for reply, it will be very helpful!

Best regards, Alex