Hello all,
I have a question about TPS65218.
When IN_BU is tied 4.2V, CC is tied GND, DCDC5 is not used and DCDC6 is used, How should L5 and FB5 be tied?
Regards.,
Mitsuharu Iwasaki
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hello all,
I have a question about TPS65218.
When IN_BU is tied 4.2V, CC is tied GND, DCDC5 is not used and DCDC6 is used, How should L5 and FB5 be tied?
Regards.,
Mitsuharu Iwasaki
Iwasaki-san,
L5 can be left floating. FB5 should be tied high to DCDC6. Also DCDC5 should be disabled in the register 0x11h if FSEAL = 0. If FSEAL=1, then FB5 must be tied to FB6. Let me know if there are any other questions. Thanks!
Regards,
Paul Kundmueller