Solder Reflow Profile of TPS54335A

Patrick Zeng

Other Parts Discussed in Thread: TPS54335A

Hi Team,

My customer is asking for the solder reflow profile of TPS54335A. I'm wondering where should I get such information? Thanks.

Regards,

Patrick

over 9 years ago

0 JohnTucker over 9 years ago

TI__Guru**** 191445 points

There is some information here:

processors.wiki.ti.com/.../Package_Reflow_Profiles

0 JohnTucker over 9 years ago in reply to JohnTucker

TI__Guru**** 191445 points

And here:

www.ti.com/.../snoa550e.pdf

0 Patrick Zeng over 9 years ago in reply to JohnTucker

TI__Intellectual 1090 points

Hi John,
Thanks for the quick reply. Customer is using PowePad package. I assume that the doc attached is also applied to such package, right?

Regards,
Patrick

0 JohnTucker over 9 years ago in reply to Patrick Zeng

TI__Guru**** 191445 points

So far as i know, the PowerPad package uses standard reflow profile. You can always check your specific IC by looking on the MSL label.

0 Patrick Zeng over 9 years ago in reply to JohnTucker

TI__Intellectual 1090 points

Thanks John! It's helpful.

Regards,
Patrick

Power management

Power management forum

Solder Reflow Profile of TPS54335A