• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 63 subscribers
  • Views 642 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Charge system simulation with BQ27541 chip

Thomas Lin8
Prodigy 70 points
Other Parts Discussed in Thread: BQ27541, EV2400, BQSTUDIO

Hi,

We would like to use BQ27541 as the battery gas gauge battery controller.

Therefore, the charge system implement I2C as battery healthy and status readout.

In case of confirm and check charge system, might use battery simulator. But how to simulate I2C interface for readout.

Does anyone support idea for this use case?

Sincerely,

Thomas Lin

  • 0
    TI__Guru* 76230 points
    Hi Thomas
    We have a software tool that simulates your host controller actions via i2c. It is called bqstudio. Pls download and iinstall on your computer. You would need the ev2300 or ev2400 interface to connect your computer to the device.
    pls refer to the user guide of the EVM of the device for additional details.

    thanks
    Onyx