chock change for design

Patrick Chen

Other Parts Discussed in Thread: TPS53625

Hello,

Pic 1 is customer original design with inductor of PL1/PL2. But the package size of inductor are larger so customer would like to change new chock to replace PL1/PL2 as pic 2. If customer change this inductor, do we need fine tune anything for schematics? Thank you.

Pic 1

Pic2

Patrick

over 8 years ago

0 JohnTucker over 8 years ago

TI__Guru**** 191445 points

Can you include the TI part number that you are concerned about in the title of you post?

0 Patrick Chen over 8 years ago in reply to JohnTucker

Mastermind 8875 points

Dear John,

please refer to below. Thank you.

Patrick

0 JohnTucker over 8 years ago in reply to Patrick Chen

TI__Guru**** 191445 points

Patrick,

TPS53625 is a proprietary solution. Can I ask you to contact imvp@list.ti.com directly? Please reply here so I can remove your post from e2e.

Thanks,

Power management

Power management forum

chock change for design