Quick Charger 3.0 Device

Alber, Moon

Intellectual 720 points

Other Parts Discussed in Thread: BQ25890H

Hello

I'm Alber as a FAE in Arrow Korea.

My customer will apply the QC 3.0 application in their product(Moible Router).

Does TI have QC 3.0 solution with full specifitcation?

and Would you please recommend the device part number?

over 8 years ago

0 Fernando Lopez over 8 years ago

TI__Expert 8230 points

Hello Alber,

Please review the bq25890H, which supports HVDCP adapters with different interface chips such as the ones found in QC3.0 adapters. Using its programmable output driver on the D+/D- lines, a host can emulate the handshaking with different protocols available in the market. We also have an application note that elaborates on this.

Thanks.

0 Alber, Moon over 8 years ago in reply to Fernando Lopez

Intellectual 720 points

Hi, Fernando

Thank you for your answer.
The input voltage range of QC 3.0 is from 3.7V to 20V.
But maximum BQ25890H's spec is 14V.
Is this not available to using higher voltage over 14V? such as 20V...

Power management

Power management forum

Quick Charger 3.0 Device