TPS3780BQDBVRQ1　Question

taichi

Expert 1395 points

Other Parts Discussed in Thread: TPS3780-Q1

Hello、

My Customer have a questions.

Can you have a Value(Min & Max) of under spec.

Datasheet is written only typical value.

Tpd(r) min? typ5.5uS max?

Ｔpd(f) min? typ10uS max?

Ｔsd min? typ570uS max?

Regards,

Taichi

over 8 years ago

0 Ryan Eslinger over 8 years ago

TI__Guru 55940 points

Hi Taichi,

The timing of TPS3780-Q1 is dependant on several application specific factors such as the voltage on VDD and overdrive. Figures 13 through 19 provide curves that show these application conditions can greatly vary the timing.

Very Respectfully,
Ryan

0 taichi over 8 years ago in reply to Ryan Eslinger

Expert 1395 points

Hi Ryan-san,

Thank you, your quick response.

I Checked in figure.13 ~ 19.
It draws the timing chart at VDD1.5V & 6.5V.

Do you have VDD = 3.3V data ?
My customer plan to use Vdd=3.3V.

Regards,
Taichi

0 Ryan Eslinger over 8 years ago in reply to taichi

TI__Guru 55940 points

Hi Taichi-san,

The 3.3V data will be between 1.5V and 5.5V. We do not have this data available.

Very Respectfully,
Ryan

Power management

Power management forum

TPS3780BQDBVRQ1　Question

Power management

Power management forum

TPS3780BQDBVRQ1 Question

TPS3780BQDBVRQ1　Question