• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 63 subscribers
  • Views 735 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

UCC28911: UCC28911 non-isolated design

PAN-M
Mastermind 8375 points
Part Number: UCC28911
Other Parts Discussed in Thread: PMP10767, UCC28910, PMP9176

Dear all.

Our customer need ACDC design about AC100V to DC5V-100mA(load=motor).
I found PMP10767.
Please teach me a change point and calculation formula in this design.

Regards,
PAN-M

  • 0
    TI__Genius 9130 points
    Pan,

    PMP9176 is probably a slightly better design to use - it's designed for 9 V @ 120 mA, and it uses UCC28910 (lower cost).

    For universal AC input (90-264 V ac), the biggest challenge for 5 V output will be the small duty cycle at high line.

    However, your spec is only 100 V ac, is your application low-line only? In that case, PMP9176 should work ok for you.

    To get ~5 V output, change R4 to 86.6 k initially.


    I will check with the designer of PMP9176 to see if any other changes are required or recommended.

    Thanks,
    Bernard
  • 0 in reply to Bernard Keogh
    Mastermind 8375 points
    Thank you for support.
    I will inform to our customer this design.
    If you have any comment, pls. send me.
    Regards,
    PAN-M