• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 63 subscribers
  • Views 609 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LM5175: 9 to 36V Vin and 20A Iout reference design

Patrick Chen
Mastermind 8875 points
Part Number: LM5175

Hello,

             Do we have 9 to 36V Vin and 20A Iout reference design for LM5175? Thank you. 

BR

Patrick

  • 0
    TI__Genius 13700 points
    Hello Patrick,

    The place such a design would be located is at this link below:
    www.ti.com/.../toolssoftware


    That said this EVM example is as close to what you are asking for from what is currently published:
    www.ti.com/.../lm5175evm-hp

    A large factor in design feasibility of your request is what is your output voltage?

    I would strongly recommend that you take your design parameters for your input voltage range, output current and output voltage and on the far right side of the product page using the Webench portal you can input your design values .
    The result will be a full converter schematic with all the supporting components defined in a unique digital reference design tailored to your requirements.